News and Insight

Latest News

C-Kore celebrates successful decommissioning campaign off Western Australia

C-Kore Systems has successfully completed a decommissioning campaign offshore Australia, using C-Kore Sensor Monitor units to interrogate the wellhead pressure and temperature sensors on the subsea oilfield.  With their automated test routine, the C-Kore Sensor Monitor units quickly and repeatedly tested and data-logged the information allowing the Operator to complete […]

July 27th, 2023|

Another Brazilian contract for C-Kore Subsea Testing Tools on a large subsea construction campaign

C-Kore Systems recently delivered their automated subsea testing tools for a large subsea
construction campaign in Brazilian waters. The C-Kore tools will be used to perform the subsea
electrical verification of new umbilicals after installation.
C-Kore’s subsea testing tools are used by operators and installation contractors around the
world on both installation campaigns and […]

July 3rd, 2023|

C-Kore units easy to use for Equinor & DeepOcean in Norway

C-Kore Systems recently completed a deployment with DeepOcean AS for Equinor.  The C-Kore testing tools were used to quickly and simply confirm the status of subsea electrical jumpers on the Tordis field in the Norwegian waters of the North Sea. The C-Kore team provided easy to follow training prior to […]

March 29th, 2023|

C-Kore’s new product, Topside Wireless Modem, improves safety on the back-deck during umbilical installations

C-Kore Systems is launching a new product, their Topside Wireless Modem at GUH’s Subsea Expo Exhibition in Aberdeen.  This latest product completes their line of test tools to now offer a complete solution for Umbilical Installation Monitoring.  The Topside Wireless Modem improves safety on back-deck operations by reducing the risk […]

February 21st, 2023|

C-Kore work with Cranium Engineering on another successful Nigerian deployment

C-Kore’s Subsea Testing tools have successfully completed a complex subsea electrical integrity campaign for a major oil operator in Nigeria, via VAYCO Oil Tools and their Nigerian partner, Cranium Engineering.  C-Kore was selected as fast and accurate measurement was essential to minimise disruption during Turn Around Maintenance (TAM) on the […]

February 9th, 2023|

C-Kore’s Western Australia sensor investigation campaign saves operator $1m AUD

C-Kore Systems successfully completed another subsea intervention campaign in Australian
waters for a major operator. Their C-Kore Sensor Monitor unit interrogated a wellhead pressure
and temperature sensor to prove the well’s correct operation when feedback wasn’t available
from the subsea control system. The use of the C-Kore unit saved the operator over one […]

December 21st, 2022|

C-Kore Systems Welcomes New Board Members

Following continued growth C-Kore Systems is pleased to announce the appointment of Greg Smith and Cynthia Pikaar to the C-Kore Board of Directors.

Greg is one of the founding members of C-Kore and has held the title of General Manager since its inception.   With a first-class honours (with distinction) degree in […]

September 26th, 2022|

C-Kore celebrates their 600th Subsea Testing Unit Deployment with their new Subsea Optical TDR tool

C-Kore Systems is proud to announce the deployment of their 600th subsea testing tools. This milestone event occurred for an installation campaign in the Gulf of Mexico, one of C-Kore’s growing markets and included their new Subsea Optical TDR tool.

C-Kore’s subsea testing units have gained worldwide acceptance with both operators […]

September 20th, 2022|

Upcoming Exhibitions

  • FFU Seminar Stavanger, Norway
    25 January 2024
  • Subsea Expo Aberdeen, UK
    20-22 February 2024
  • Subsea Tieback San Antonio, USA
    27-29 February 2024
  • Oceanology London, UK
    12-14 March 2024
  • Subsea Technology Eastern Mediterranean Limassol, Cyprus
    16-18 April 2024
  • IPF: Business Network for Offshore Wind New Orleans, USA
    23-25 April 2024
  • More Soon
    If we’re not exhibiting near you please Get in Touch, we would be delighted to help.

Go to Top