News2018-11-22T14:52:11+00:00

News and Insight

Latest News

C-Kore’s Subsea TDR First Deployment

Subsea UK News reports on the first deployment of C-Kore’s Subsea TDR.

The article highlights the cost savings achieved by Nexen on a fault-finding operation on the Telford field in the North Sea. C-Kore new Subsea TDR localises and identifies faults subsea without the need for downlines.

To read the full […]

January 24th, 2018|Deployment|

C-Kore’s 100th Subsea Testing Unit Deployed

C-Kore Systems, has recently celebrated the deployment of its 100th C-Kore unit. This milestone was reached on a fault-finding campaign with a major oil company in the North Sea.

The units have simplified subsea testing in over 30 different fields worldwide and helped both major oil companies and their installation contractors […]

November 28th, 2017|General|

C-Kore’s Subsea Technology expands to West Africa assisted by VAYCO Oil Tools & Cranium Engineering

C-Kore Systems, a UK based company, has signed a Memorandum of Understanding with VAYCO Oil Tools to promote their C-Kore Subsea Testing Tools in Nigeria and other West Africa countries.

The C-Kore testing tools save customers significant time and money on installation/commissioning campaigns and fault-finding operations by automating and significantly speeding […]

November 15th, 2017|General|

C-Kore Systems helping operator in Caspian region

C-Kore Systems recently deployed their fault-finding tools with a major operator working in the Caspian Basin. The units quickly located the fault in the subsea field, allowing the operator to replace the faulty equipment and bring the systems back on-line with a minimum of vessel time.

The C-Kore Subsea testing tools […]

October 26th, 2017|Deployment|

Down-Hole Testing added to C-Kore Systems Subsea Services

C-Kore Systems recently expanded the application of their subsea testing technology to down-hole testing.

The new application was tested on Total’s K5F field off the coast of the Netherlands. The C-Kore units helped locate the source of low IR on the down-hole system by plugging directly into the subsea Christmas tree, […]

September 7th, 2017|Deployment|

North Sea embraces C-Kore for fault-finding operations

C-Kore Systems recently deployed their subsea testing tools on three different fault-finding operations on the North Sea for three different UK customers. In each case C-Kore found the root cause of low IR faults, allowing the operators to return the field to health.

The C-Kore testing tools save customers significant money […]

June 16th, 2017|Deployment, Exhibition|

C-Kore is certified to the new ISO 9001:2015 standard

C-Kore Systems Ltd. has been approved and certified by TÜV (UK) as conforming to the new ISO 9001:2015 standard in Quality Management System.  The scope of the certification is: “The design, manufacture and through-life engineering services of subsea measurement instruments.”

Tim Overfield, Managing Director of C-Kore Systems Ltd. said: “We are […]

April 26th, 2017|General|

Upcoming Exhibitions

  • FFU – Stavanger, Norway
    31 January 2019

  • Subsea Expo – Aberdeen, UK
    7 – 9 February 2019

  • Subsea Tieback – San Antonio, TX USA
    5 – 7 March 2019

  • UTC – Bergen, Norway
    11 – 13 June 2019